Menu
Adjustable Roll Suport Includes: 2 Adjustable sockets – 1 Roll Axle 2 Vertical Threaded Rods – 8 Hex Nuts 1 Cast Iron Roll (Omit When...
Adjustable Roll Suport Includes:
2 Adjustable sockets – 1 Roll Axle
2 Vertical Threaded Rods – 8 Hex Nuts
1 Cast Iron Roll (Omit When Ordering Non-Conductive Roller)
Adjustable Roll Guide Includes: 4 Adjustable Sockets 2 Roll Axles 2 Vertical Threaded Rods 12 Hex Nuts 2 Cast Iron Rolls (Omit When Ordering Non-Conductive...
Adjustable Roll Guide Includes:
4 Adjustable Sockets
2 Roll Axles
2 Vertical Threaded Rods
12 Hex Nuts
2 Cast Iron Rolls (Omit When Ordering Non-Conductive Rollers)
Material: Spring cushion hanger consists of a set of two springs and four retainers only. Service: Generally used with a single pipe roll. Recommended for...
Material: Spring cushion hanger consists of a set of two springs and four retainers only.
Service: Generally used with a single pipe roll. Recommended for installation where the vertical movement does not exceed 1 1/4 inches.
Approvals: Complies with Federal Specification WW-H-171E (Type 50) & Manufacturers Standardization Society SP-69 (Type 49).
Maximum Recommended Load is 300 lbs.
Adjustable Roller Stands, used in conjunction with Non-Conductive Rollers, offer an alternative to the epoxy type pipe chocks for preventing or correcting crevice corrosion problems....
Adjustable Roller Stands, used in conjunction with Non-Conductive Rollers, offer an alternative to the epoxy type pipe chocks for preventing or correcting crevice corrosion problems. The polyurethane based Non-Conductive Rollers will not abrade the pipe’s coating and allows moisture to drain away from the bottom of the pipe. Non-Conductive Rollers do not contact enough of the pipe surface to allow moisture or organic materials (grass clippings, leaves, pine needles, etc) to collect at the pipe roller interface. Non-Conductive Rollers are particularly useful on pipes that show significant expansion and contraction.
The Adjustable Pipe Roll Stand generally includes a galvanized cast iron base, steel plate, adjusting bolts and Non-Conductive Roller with stainless steel sleeve. The base can also be fabricated from carbon or stainless steel to standard or non-standard specifications. Available for pipe sizes 2” through 24”.
U-Bolt Coat is a seamless, vulcanized, polyolefin material that is applied to a standard hot dipped, galvanized zinc plated or stainless steel u-bolt. They effectively...
U-Bolt Coat is a seamless, vulcanized, polyolefin material that is applied to a standard hot dipped, galvanized zinc plated or stainless steel u-bolt. They effectively control crevice corrosion on above ground piping by eliminating any possible metal to metal contact between the top and sides of the pipe. These coated u-bolts are also used with FRP Half Rounds to help control crevice corrosion on the bottom of a painted pipe. U-Bolt Coat type u-bolts can also help reduce vibrations and noise levels. The polyolefin coating is durable and displays excellent resistance to UV rays, heat, cold, abrasion and electrolysis.
Epi-Seal Seam Sealer is a two component, fiberglass reinforced epoxy resin system for high effciency repairs on all riveted, bolted or welded tank or vat...
Epi-Seal Seam Sealer is a two component, fiberglass reinforced epoxy resin system for high effciency repairs on all riveted, bolted or welded tank or vat seams.
Available in 1 LB or 2 LB Kits: 12 Kits per Case
2880 Bergey Road, Suite F, Hatfield, PA 19440
Phone: (877) 373-0118 | Fax: (888) 850-3787
Western PA Location: 500 Alpha Drive, Canonsburg, PA 15317