Denso Butyl 30 Tape (30 Mil)

Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1″ or 55% to achieve double thickness. If application temperature is 32°F or below, Denso Butyl Primer is optional.

Irregular surfaces such as valves, fl anges, etc. may require the use of Densyl Mastic or Denso Profi ling Mastic. Refer to the product sheets for these specifi c products for information on application and selection.