Other

Read less

This perforating tool can be used with compression film which, when used properly, allows the CO2 gas generated by the curing process and excess water to escape.

Scar-Guard® requires compression film and a perforating tool.

Read less

This pocket-sized (3″ x 5″) stainless steel gauge measures the depth of pitting in pipe and other steel surfaces by lowering the indicator into the pit and reading the depth from the scale. Sold complete with a leather pouch. 

Directions for Use

The Pipe Pit Gauge is placed on the edge along the pipe and the indicator arm is depressed until the stylus touches the bottom of the pit or crater. The depth of the pit is then indicated on the scale marked on the body of the gauge. This can be compared with the nominal wall thickness of the pipe. Data printed on the body of the gauge includes a 0 – 4.5 inch ruler, weight per foot and formulas which are likely to be of use to the pipe coater. 

Read less

The PosiTest DFT Coating Thickness Gauge measures coatings on ALL metals with a measurement range of 0-40 Mils.

Read less

The Standard J Roller features a 1-1/2″ diameter x 3″ wide non-marring rubber roller with a 10″ long handle and vinyl grip.

Read less

The Testex Spring Micrometer #354 is a precision spring-loaded dial thickness gauge specifically designed for measuring thickness of Testex replica tape with a range of 0-50 mils and includes a burnishing tool.

Read less

The Testex Training Surface is a 1.5 inch (38mm) diameter disk of phenolic material and is used for familiarizing new users with replica tape.

Read less

The Testex X-Coarse Tape is used with a gauge to measure the surface roughness of blast-cleaned steel in the roughness range of 1.5 to 4.5 mils.

Read less

For measuring wet film thickness of paints, enamels, lacquers, adhesives & many other wet coatings that are sprayed, dipped or brushed on a smooth surface.

1. Place gauge on wet film at 90° angle
2. Press into film
3. Withdraw and note deepest tooth having paint on it and next higher tooth that is not coated
4. The wet film thickness lies between these two readings
5. Clean gauge in any suitable solvent immediately after use

Meets ASTM D 4414 “Standard Practice for Measurement of Wet Film Thickness of Organic Coatings by Notched Gauges” Standard used is traceable to NIST- All Aluminum – Size: 2-1/4 ” x 3-1/4″ x .034″

Read less