Categories

Tooling

PosiTest Thickness Gauge

PosiTest magnetic pull-off thickness gauge for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing, metalizing, plating, etc.) on steel. ACCURATE Certificate of Calibration showing...

Read more

PosiTest magnetic pull-off thickness gauge for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing, metalizing, plating, etc.) on steel.

ACCURATE

  • Certificate of Calibration showing traceability to NIST included with every gage
  • Matching Calibration Standards and Procedures available for every model
  • Highly wear resistant Carbide Probe for longest life and continuous accuracy
  • Removable center of dial cover for easy calibration adjustment
  • Conforms to national and international standards

 

DURABLE

  • Extra rugged housing, not affected by mechanical shock, water, acid or solvents
  • Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement
  • Can be used fully supported or with only the front probe area contacting the surface
  • Functions on a permanent rare-earth cobalt magnet
  • No batteries/electronics
  • 2 year warranty

 

EASY TO USE

  • Positive visual and audible indicators to designate when thickness reading is established
  • “V” grooves in probe housing and Gage base allow correct positioning on cylindrical objects
  • Compact, lightweight, precisely balanced, independent of gravity – can be used in any position
  • GO/NO-GO button can be pre-set for rapid measurement
  • Probe contact and dial rotation all in a one-finger operation
  • Furnished with wrist strap and instructions in a high-quality leather case with belt loops for your convenience

Read less

Add to Quote

Quick Add® Adaptors for 11 & 23mm Belts

 Offers quick Bristle Blaster® belt changes  No tools required  Increases belt life due to additional cooling  Improved durability via advanced material...

Read more

 Offers quick Bristle Blaster® belt changes
 No tools required
 Increases belt life due to additional cooling
 Improved durability via advanced material composition
 Includes: Allen wrench and Allen Screw

Read less

SPY Electronic Pig Tracking and Locating Systems

For the most reliable signal available, the SPY® PT (Pig Transmitter) uses low frequency signals to effectively and consistently penetrate a steel pipe wall. Numerous...

Read more

For the most reliable signal available, the SPY® PT (Pig Transmitter) uses low frequency signals to effectively and consistently penetrate a steel pipe wall. Numerous transmitter sizes are offered to cover a full spectrum of pipe diameters. Each transmitter is self-contained and travels inside various pigs, attached to versatile brackets, or towed. A handheld receiver and wand are used to locate the transmitter. Examples of applications are: Mainline transmission, Gathering lines, subsea lines, munincipal gas, water/wastewater/refining and the process industries.

MODEL 1 – The Model 1 System is designed for pipe sizes 2 to 4 inches. This system includes the PT-101 Transmitter, especially designed to fit poly (foam) and urethane pigs. The PT-101 transmitter negotiates line sizes of 2 to 4 inches. Not suited for metal body pigs.

MODEL 2 – The Model 2 System is designed for pipe sizes 2 inches to 8 inches. This system includes the PT-107 Transmitter, especially designed to fit poly (foam) and urethane pigs. The PT-107 transmitter negotiates line sizes of 2 inches to 8 inches. Not suited for metal body pigs.

MODEL 4 – The Model 4 System is designed for pipes 6 inches and up, using the PT-275 Transmitter.

MODEL 12 – The Model 12 system is designed for pipes 12 inches and up, using the PT-750 Transmitter.

Read less

Add to Quote

SPY Jeep Meter DCPJM

The DCPJM Jeep Meter provides efficient, economical output voltage testing in the field. These are handy for inspectors, superintendents, foremen and other field personnel to...

Read more

The DCPJM Jeep Meter provides efficient, economical output voltage testing in the field. These are handy for inspectors, superintendents, foremen and other field personnel to check voltages during operations, whenever and wherever there is doubt. They are lightweight, rugged and easy to read analog meters. The DC Pocket Jeep meter measures the output voltage of DC holiday detectors and has a range of 0-5 kv. This DCPJM requires no batteries.

Read less

Add to Quote

SPY Jeep Meter Model JM

The Model JM Jeep meter provides the ultimate in accuracy and versatility. It features a digital display of measured voltages. The precision measurement displayed eliminates...

Read more

The Model JM Jeep meter provides the ultimate in accuracy and versatility. It features a digital display of measured voltages. The precision measurement displayed eliminates interpretation errors and is perfect for every day tests.
This Jeep meter measures both pulse and DC voltage output. For pulse type holiday detectors, used to inspect shrink sleeves, tapes, coal tars, etc, the JM will measure up to 40 kV. For DC holiday detectors, used to inspect thin film epoxy coatings, the DC range of the JM measures up to 5kv.
When used with pulse type detectors, this Jeep meter automatically senses the polarity of the pulse. Leading-edge electronics solve the stability and repeatability problems sometimes experienced in the older models.

Read less

Add to Quote

SPY Jeep Meter PJM

The PJM Jeep Meter provides efficient, economical output voltage testing in the field. These are handy for inspectors, superintendents, foremen and other field personnel to...

Read more

The PJM Jeep Meter provides efficient, economical output voltage testing in the field. These are handy for inspectors, superintendents, foremen and other field personnel to check voltages during operations, whenever and wherever there is doubt. They are lightweight, rugged and easy to read analog meters. The Pocket Jeep meter is for high voltage pulse output detectors and has a range of 0-20 kv. Two standard 9-volt alkaline batteries power the PJM.

Read less

Add to Quote

SPY Pig Transmitters

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go – through gathering lines, mainline transmission lines,...

Read more

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go – through gathering lines, mainline transmission lines, municipal gas, water and waste water lines, refinery and other industrial piping.

Using strong low frequency signals the Pig Tracker system gives you a more reliable signal life. Depending on the model, the Pig Trackers signal can be received for up to 500 hours. It operates on standard batteries – readily available from retail stores. No recharger is necessary.

The Pig Tracker system consists of a cylindrical transmitter which travels with the pig, and a hand-held pick up wand and receiver that receive the signals and inform the operator of the transmitter / pigs location.

 

 

Read less

Add to Quote

SPY Portable Holiday Detector

Portable holiday detectors are designed for various pipeline, plant, and other surface applications where the inspection surface remains stationary and the detector is moved over...

Read more

Portable holiday detectors are designed for various pipeline, plant, and other surface applications where the inspection surface remains stationary and the detector is moved over the inspection surface. High voltage detectors are used for thicker surface coatings, such as those used on pipelines and other industrial applications. Low voltage, wet sponge detectors are used for thin film applications.

MODEL 780 – For thin film coatings the easy-carry and easy to handle SPY Model 780 speeds inspection time with its built in Jeep meter and various other time saving and comfort features. This ergonomic holiday detector incorporates all the features of the previously manufactured SPY Model 715 detector with numerous upgrades and enhancements.

MODEL 785 – For thicker coatings such as coal tars, extruded and tape coatings, the Model 785 has a range of infinite voltage settings from 1,000 to 15,000 volts. This wide range permits you to maintain a steady inspection rate on most types of coatings on most pipe sizes without changing detectors. Pulse voltage output only.

MODEL 790 – For a wide range of coatings the easy-carry and easy to handle SPY Model 790 speeds inspection time with its built in Jeep meter and various other time saving and comfort features. This ergonomic holiday detector incorporates all the features of the previously manufactured SPY Model 735 with numerous upgrades and enhancements.

Read less

Add to Quote

SPY Spring Electrodes

Spring electrodes are cut to suit the outside diameter of your pipe. They are supplied with spring ends to fit directly into your hoilday detector...

Read more

Spring electrodes are cut to suit the outside diameter of your pipe. They are supplied with spring ends to fit directly into your hoilday detector coupling.

Read less

Add to Quote

Standard J-Roller

The Standard J Roller features a 1-1/2″ diameter x 3″ wide non-marring rubber roller with a 10″ long handle and vinyl grip.    ...

Read more

The Standard J Roller features a 1-1/2″ diameter x 3″ wide non-marring rubber roller with a 10″ long handle and vinyl grip.

 


 

Read less

Search

Shopping cart

Cart

Have Questions?

Call 877-373-0118 to speak with a product specialist.

or

Click here to send a message.