Denso Glass Outerwrap

Protective fiberglass outerwrap


A fiberglass cloth impregnated with a water activated resin that is used as a high impact protective outerwrap over Denso petrolatum tapes. Also used as a pipe repair tape. A protective fiberglass coating which offers exceptional mechanical and impact strength for underwater, underground, and above ground pipe and pipelines.

Product Manufacturer:
Classified by a UN:

•Resists cold and hot temperatures
•Easy to apply, no mixing or messy clean up
•Resistant to water, acid, salts, or soil organics
•Can be applied underwater or to wet surfaces
•Minimal surface preparation required
•Quick, long term protective coating, ready for immediate service
•Contains no solvents

Prepare surfaces by removing all loose scale, rust or other foreign matter in accordance to SSPC SP2 “Hand Tool Cleaning” or SP3 “Power Tool Cleaning”. High pressure water wash of 3,000 – 7,000 psi is also suitable. Spirally wrap a layer of Denso Petrolatum Tape with a minimum 1″ overlap. For severely corrosive environments, a 55% overlap is recommended. While wrapping, press air pockets out and smooth all lap seams. Using rubber gloves, remove the Denso Glass Outerwrap from the hermetically sealed foiled pouch and soak in temperate water (salt or fresh) for 20 to 30 seconds. Remove and begin wrapping tightly, overlapping a recommended 50%.


Irregular surfaces such as valves, flanges, etc. may require the use of Densyl Mastic or Denso Profiling Mastic. Refer to the product sheets for these specific products for information on application and selection


Shopping cart


Have Questions?

Call 877-373-0118 to speak with a product specialist.


Click here to send a message.