Densopol 60 & 60HT Tape (60 Mil)

Heavy duty PVC/Bitumen fabric reinforced tape


Densopol 60 & 60 HT is a cold applied, synthetic fabric reinforcement coated with rubber bitumen adhesive and backed with a PVC film. For the anti-corrosion protection of buried or immersed pipes and fittings. The tapes can be applied by hand or machine to weld joints, bends, bare pipe lengths and pipe fittings.

Product Manufacturer:
Add to Quote
Classified by a UN:
Pricing Calculator (MS Excel Download):

• Applied to marginally prepared surfaces (SSPC SP 2-3)

• Cold applied

• Good comformability

• Good impact resistance

• Excellent adhesion to pipe and self

• Excellent resistance to cathodic disbonding

• Compatible with common pipe coatings

Prepare surfaces by removing all loose scale, rust or other foreign matter by wire brush. Surface must be clean, dry and free of grease. Apply thin fi lm of Denso Primer D to all surfaces to be protected and allow to dry. Peel back interleaving and apply adhesive side of the tape to the primed surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1″ or 55% to achieve double thickness. Irregular surfaces such as valves, fl anges, etc. may require the use of Densyl Mastic or Denso Profi ling Mastic. Refer to the product sheets for these specifi c products for information on application and selection.


Shopping cart


Have Questions?

Call 877-373-0118 to speak with a product specialist.


Click here to send a message.