PRITEC® is a two-layer anti-corrosion coating designed to protect pipe used in the gas, water and waste water industries. PRITEC’S® side extrusion application method is ideal...
PRITEC® is a two-layer anti-corrosion coating designed to protect pipe used in the gas, water and waste water industries. PRITEC’S® side extrusion application method is ideal for coating small and large diameter pipe ranging from 3/4” to 36” in diameter. This coating combines the proven protective qualities of a polyethylene outer coating with a special butyl rubber adhesive.
Powercrete® R95 is a single coat, 100% solids, high build epoxy novolac that coats, repairs and rehabilitates pipelines operating at maximum temperatures up to 95ºC...
Powercrete® R95 is a single coat, 100% solids, high build epoxy novolac that coats, repairs and rehabilitates pipelines operating at maximum temperatures up to 95ºC (203ºF). As an abrasion resistant overlay (ARO) it is compatible with FBE and CTE mainline coatings and can be used on any metal structure. This 2-component, solvent-free epoxy can easily achieve a dry film thickness of up to 40 mils in a single application and can be hand or spray applied.
Royston A51 is thixotropic, brush applied coal tar coating for below grade applications. A time proven coating technology for providing corrosion protection to metal fittings,...
Royston A51 is thixotropic, brush applied coal tar coating for below grade applications. A time proven coating technology for providing corrosion protection to metal fittings, flanges, valves, tanks, mechanical couplings, anode connections and other difficult and irregular configurations. It is also designed to protect concrete surfaces from adverse environments.
The A-51 Low VOC has a VOC content of <327 g/l (2.73 lb/gal) and shares all other properties with the regular A-51.
Royston Butyl Moldable Sealant (C125 Tac Tape) is a 125 mil, high temperature, cold applied, dielectric putty. It is designed to be used as a...
Royston Butyl Moldable Sealant (C125 Tac Tape) is a 125 mil, high temperature, cold applied, dielectric putty. It is designed to be used as a filler material to fill gaps and voids and to contour irregular surfaces, providing a seamless, water tight barrier preventing overwraps from bridging over substrates. The compound serves as an initial protection against corrosion and electrolysis on irregular fittings and hard-to-coat metal substrates. The use of Butyl Moldable Sealant provides a bonded protective coating with exceptional cohesive strength, flexibility and versatility. Royston Butyl Moldable Sealant requires the use of a primer before application.
A 35 mil cold applied tape with a flexible plastic backing and an elastomeric adhesive, for ambient temperature below grade application. Greenline Tape has a...
A 35 mil cold applied tape with a flexible plastic backing and an elastomeric adhesive, for ambient temperature below grade application. Greenline Tape has a leading adhesive edge to secure the lap seal and guide in spiral wrap applications.
ROYSTON ROSKOTE R28 Rubberized Mastic bonds firmly to clean steel surfaces without use of a primer and also to coal tar and hot applied asphalt....
ROYSTON ROSKOTE R28 Rubberized Mastic bonds firmly to clean steel surfaces without use of a primer and also to coal tar and hot applied asphalt. It forms a thick, tough coating which will not oxidize, craze, alligator, crack, check, loosen or scale. It provides a high degree of electrical resistivity and shows excellent performance in cathodic protection or stray current situations. It withstands soil stresses and resists attack by alkalis, acids, salts and moisture.
Royston Roybond 747 is a primer used with butyl and elastomeric products and is a liquid adhesive that creates a permanent bond between the tape...
Royston Roybond 747 is a primer used with butyl and elastomeric products and is a liquid adhesive that creates a permanent bond between the tape and the substrate. Roybond 747 can be used for substrate temperatures up to 165°F (74°C) and is available in gallons, aerosol spray cans and quart containers and is compatible with Steel, Stainless Steel, Ductile Iron, other metals, FBE and PE. A 4 mil WFT (1.0-1.5 mil DFT) of Roybond 747 or Roybond 747 Aerosol should be applied and allowed to dry prior to application of the tape.
Royston Thick N’ Quick Mastic is a thixotropic, brush applied asphalt coating for below grade applications. Thick N’ Quick is a time proven coating technology...
Royston Thick N’ Quick Mastic is a thixotropic, brush applied asphalt coating for below grade applications. Thick N’ Quick is a time proven coating technology for providing corrosion protection to metal fittings, flanges, valves, tanks, mechanical couplings, anode connections and other difficult and irregular configurations.
Thick N’ Quick is easy to apply by brush or rubber glove. Due to its thixotropic nature, it resists drips and sags during application but will become more flowable the more it is mixed.
Tapecoat 20® is a hot-applied 58 mil coal tar tape for ambient temperature below grade application. Tapecoat 20 is designed to protect buried metal surfaces...
Tapecoat 20® is a hot-applied 58 mil coal tar tape for ambient temperature below grade application. Tapecoat 20 is designed to protect buried metal surfaces from underground corrosion and electrolysis. These surfaces include coating pipe, girth welds, fittings, couplings, tanks, cable, conduit, and tie rods. Tapecoat 20 is resistant to thermal expansion, impact and abrasion. Tapecoat 20 consists of a specially formulated pliable coal tar coating completely saturated into and bonded to both sides of a high tensile strength fabric. In addition, it has a polyester film adhering to the coating which facilitates unwinding of the roll and acts as an outer wrap providing additional mechanical strength against backfill and soil stress.
2880 Bergey Road, Suite F, Hatfield, PA 19440
Phone: (877) 373-0118 | Fax: (888) 850-3787
Western PA Location: 500 Alpha Drive, Canonsburg, PA 15317