Coatings and Linings Archives - Page 9 of 10 - Liberty Sales & Distribution

Tapecoat H50

Tapecoat H50 is designed to protect above ground, buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints,...

Tapecoat H50 is designed to protect above ground, buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Its unique “MAF” film backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull back due to memory. Tapecoat H50 Gray is resistant to UV rays, thermal expansion, impact, abrasion and can be applied over a wide range of ambient temperatures.

Read less

Variation

Clear

Tapecoat HT/MB

Tapecoat HT/MB (High Temperature, Mesh Backed) Tape is a 40 mil polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance...

Tapecoat HT/MB (High Temperature, Mesh Backed) Tape is a 40 mil polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance on pipelines with service temperatures up to 300°F (149°C). The coating provides protection against corrosion and electrolysis on metal substrates. The mesh backing allows the coating to conform well to the pipe surface but does not stretch or elongate giving the HT/MB its exceptional strength against soil stress.
Tapecoat HT/MB must be applied using a 50% minimum overlap and it requires the use of a primer prior to application.

Read less

Variation

Clear

Tapecoat M50 RC (50 MILS)

Tapecoat M50 is a 50 Mil Gray polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance to protect against corrosion...

Tapecoat M50 is a 50 Mil Gray polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance to protect against corrosion and electrolysis on metal substrates. The Tapecoat M50 has an integrated primer in the adhesive which allows for faster application as there is no need to apply a separate primer when application temperatures are above 40°F. Appropriate for coating small to large diameter pipe, bends and metal structures, Tapecoat M50 is especially well suited for reconditioning field coated pipe and coating pipe in areas with high soil stresses.

Read less

Variation

Clear

Add to Quote

Tapecoat M860 Pavement Repair Coating

Tapecoat M860 provides quick and easy repair of cracks in concrete and asphalt surfaces. This cold-applied, self-adhering tape is effective as a temporary patching material and...

Tapecoat M860 provides quick and easy repair of cracks in concrete and asphalt surfaces. This cold-applied, self-adhering tape is effective as a temporary patching material and also offers excellent bonding for repair of the substrate prior to a complete asphalt over lay. Tapecoat M860 solves maintenance problems in paving material on city streets, highways, and parking structures. This puncture-resistant coating can also protect transducer and sensor wiring from tire damage, prevent pavement deterioration due to deformation in heavy-traffic areas, and provide quick temporary repair to paved surfaces on bridges and airport runways and tarmacs. Tapecoat M860 retains its ability to bond under pressure at temperatures as low as 0° F making this coating ideal for temporary repairs during the cold winter months.

Read less

Variation

Clear

Tapecoat Moldable Sealant (60 MILS)

Tapecoat Moldable Sealant is a conformable water tight coating for irregular surfaces such as bolt style mechanical couplings, bell and spigot joints, saddle tees or...

Tapecoat Moldable Sealant is a conformable water tight coating for irregular surfaces such as bolt style mechanical couplings, bell and spigot joints, saddle tees or leak clamps, as a sealant in vaults, on underground tracer wire and other low voltage manual wire connections, on anode wire connections and as an insulating adhesive with shrinkable tubing. Tapecoat Moldable Sealant is a 100% solids formulation of thermoplastic elastomeric and synthetic resins. Blended in this adhesive is an “integrated primer.”

Read less

Variation

Clear

Add to Quote

Tapecoat Omniprime

Tapecoat TC® Omniprime is a liquid primer containing no known carcinogens, no hazardous air pollutants (HAP) and is compliant with all state and US federal...

Tapecoat TC® Omniprime is a liquid primer containing no known carcinogens, no hazardous air pollutants (HAP) and is compliant with all state and US federal volatile organic compound (VOC) regulations. Requires no Red Label Hazard warning for storage. This primer can be used with all Tapecoat cold and hot-applied bonded tape systems and with Tapecoat 6025 high temperature tape when operating temperatures do not exceed 180° F. For all operational temperatures above 180° F and up to 300° F, use TC 7000 High Temp Epoxy as a primer.

Read less

Tapecoat Profile Putty

TC Profile Putty is used for filling voids and contouring irregular surfaces prior to overwrapping with TC Envirotape. This highly conformable filler putty can be used on mechanical couplings,...

TC Profile Putty is used for filling voids and contouring irregular surfaces prior to overwrapping with TC Envirotape. This highly conformable filler putty can be used on mechanical couplings, nuts, bolts, bell and spigot joints, saddle tees, leak clamps and any area that a smoother more contoured coating surface is preferred prior to application of a wax tape or mat.

Read less

Tapecoat Rugged Wrap – UV Resistant

RUGGED WRAP – a 30 mil UV resistant mesh weave fiberglass wrap that offers additional mechanical protection for protective coatings. This moisture activated non- shielding overwrap will give...

RUGGED WRAP – a 30 mil UV resistant mesh weave fiberglass wrap that offers additional mechanical protection for protective coatings.

This moisture activated non- shielding overwrap will give coatings and structures increased protection from exposure to abrasion, soil stress, frost heave and mechanical damage above and below grade.

Available in many aesthetically pleasing colors including: Silver, White, Yellow, Blue, Black. Other colors upon request.

Rugged Wrap maximum service temperature is 350°F (176°C).

Note: Rugged Wrap is a mechanical protective overwrap; it is not a corrosion preventative coating.

Read less

Variation

Clear

Tapecoat T-Tape

Tapecoat T-TAPE Gray PE is designed to protect buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints,...

Tapecoat T-TAPE Gray PE is designed to protect buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Its flexible polyethylene film backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull-back due to memory. Tapecoat T-TAPE Gray PE is resistant to thermal expansion, impact, abrasion and can be applied over a wide range of ambient temperatures.

Read less

Variation

Clear

Tapecoat TR Green

Tapecoat TR Green is 35 mil, cold applied coating designed to provide protection against corrosion and electrolysis on below grade metal substrates. Combined with strong,...

Tapecoat TR Green is 35 mil, cold applied coating designed to provide protection against corrosion and electrolysis on below grade metal substrates. Combined with strong, flexible film backing, Tapecoat TR Green provides a protective coating with cohesive strength and durability that conforms well to irregular shapes.

Tapecoat TR Green has an integrated primer; the primer is in the adhesive. This exclusive formulation allows for faster application as there is no need to apply a separate primer when application temperatures are above 40°F. The Tapecoat TR Green coating system is VOC free when applied without a primer. When used with Tapecoat Omniprime® the coating system will meet even the strictest environmental laws.

Read less

Variation

Clear

Categories

Coatings and Linings

Tapecoat H50

Tapecoat HT/MB

Tapecoat M50 RC (50 MILS)

Tapecoat M860 Pavement Repair Coating

Tapecoat Moldable Sealant (60 MILS)

Tapecoat Omniprime

Tapecoat Profile Putty

Tapecoat Rugged Wrap – UV Resistant

Tapecoat T-Tape

Tapecoat TR Green

Search

Shopping cart

Cart

Have Questions?

Natural Gas & Water Industry Products

Liberty Sales & Distribution, LLC