Menu
The Magnum Mini Torch, Model MD-50E, is designed for use with heat-shrinkable coatings and modified bitumen. It has been in use all over the world...
The Magnum Mini Torch, Model MD-50E, is designed for use with heat-shrinkable coatings and modified bitumen. It has been in use all over the world for more than 25 years. It was the first torch to feature a wind resistant electronic starter. It is completely U.L. listed.
nVent ERICO CADWELD Cathodic Protection exothermically welded connections are the accepted method of attaching cathodic protection anode leads to pipes (steel or cast iron), tanks,...
nVent ERICO CADWELD Cathodic Protection exothermically welded connections are the accepted method of attaching cathodic protection anode leads to pipes (steel or cast iron), tanks, and other structures. Cathodic protection systems are designed to prevent galvanic corrosion along a pipeline or in various structures. nVent ERICO CADWELD Cathodic Connections use a special welding material alloy to minimize heat effect on the steel, which is especially important on thin wall and high stress pipes.
FEATURES
Part of the CADWELD® PLUS system, the electronic control unit is a small, hand-held, battery-powered ignition tool that helps simplify the welded connection process. The...
Part of the CADWELD® PLUS system, the electronic control unit is a small, hand-held, battery-powered ignition tool that helps simplify the welded connection process. The CADWELD PLUS system eliminates the need for starting material and flint igniters by utilizing an electronic ignition. Two field-replaceable leads in lengths of 6 ft (1.8 m) or 15 ft (4.6 m) offer increased flexibility and versatility in hard-to-reach areas. This CE/UL® Recognized battery-powered ignition system is designed for 600 connections with one set of eight standard AA batteries (included) and requires no special batteries or chargers.
The CADWELD PLUS control unit initiates the reaction of the CADWELD PLUS welding material cup. The standard unit includes a 6 ft (1.8 m) high temperature control unit lead. The lead attaches to the ignition strip on the welding material cup using a custom, purpose-designed termination clip. After the termination clip is installed on the ignition strip, the installer pushes and holds the ignition button to start a charging and discharging sequence. Within a few seconds, the control unit sends a predetermined voltage to the ignition strip and the reaction is initiated. As the “ready” light is flashing during the first few seconds, the installer can release the button to prevent the ignition.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case that offers total protection for...
|
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4″ (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock. Interior Dimensions: |
|
This perforating tool can be used with compression film which, when used properly, allows the CO2 gas generated by the curing process and excess water...
This perforating tool can be used with compression film which, when used properly, allows the CO2 gas generated by the curing process and excess water to escape.
Scar-Guard® requires compression film and a perforating tool.
This pocket-sized (3″ x 5″) stainless steel gauge measures the depth of pitting in pipe and other steel surfaces by lowering the indicator into the...
This pocket-sized (3″ x 5″) stainless steel gauge measures the depth of pitting in pipe and other steel surfaces by lowering the indicator into the pit and reading the depth from the scale. Sold complete with a leather pouch.
Directions for Use
The Pipe Pit Gauge is placed on the edge along the pipe and the indicator arm is depressed until the stylus touches the bottom of the pit or crater. The depth of the pit is then indicated on the scale marked on the body of the gauge. This can be compared with the nominal wall thickness of the pipe. Data printed on the body of the gauge includes a 0 – 4.5 inch ruler, weight per foot and formulas which are likely to be of use to the pipe coater.
COATING THICKNESS GAUGES for ALL Metal Substrates Rugged, fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous...
COATING THICKNESS GAUGES for ALL Metal Substrates
Rugged, fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly.
– Ready to measure—no calibration adjustment required for most applications
– NEW Larger 2.8″ impact resistant color touchscreen with redesigned keypad for quick menu navigation
– NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure
– Wear resistant ruby probe tip, for long-lasting calibration
– PosiTector interchangeable platform – attach any PosiTector probe to a single gauge body
– USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
– Certificate of Calibration showing traceability to NIST or PTB included (Long Form)
Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, US Navy NAVSEA PPI 63101-000, US Navy NAVSEA 009-32, AS 2331.1.4, AS3894.3-B, and others
ENVIRONMENTAL MONITORING Measures and records climatic conditions including: Relative humidity, air temperature, surface temperature, dew point temperature, wind speed and difference between surface and dew point...
ENVIRONMENTAL MONITORING
Measures and records climatic conditions including: Relative humidity, air temperature, surface temperature, dew point temperature, wind speed and difference between surface and dew point temperatures. Ideal for surface preparation as required by ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32.
The PosiTector Kit contains one standard PosiTector body, a PosiTector 6000 ferrous coating thickness probe, a PosiTector SPG surface profile probe and a PosiTector DPM...
The PosiTector Kit contains one standard PosiTector body, a PosiTector 6000 ferrous coating thickness probe, a PosiTector SPG surface profile probe and a PosiTector DPM environmental probe. Each PosiTector body accepts the 6000, DPM and SPG probes included in the kit easily converting from a coating thickness gauge to a dew point meter or surface profile gauge.
2880 Bergey Road, Suite F, Hatfield, PA 19440
Phone: (877) 373-0118 | Fax: (888) 850-3787
Western PA Location: 500 Alpha Drive, Canonsburg, PA 15317