Liberty Test Stations are made of nonconductive, high impact, UV stabilized polycarbonate in a variety of standard colors. The test stations come standard in 6’...
Liberty Test Stations are made of nonconductive, high impact, UV stabilized polycarbonate in a variety of standard colors. The test stations come standard in 6’ length with 5 enclosed, stainless steel terminals to protect connections from the environment. Custom colors, graphics, and terminal configurations are available upon request. Bonding straps, lug terminals, and other accessories are also available. Please contact Liberty Sales to discuss your specific requirements.
STANDARD COLORS
Yellow, Orange, Blue, Brown, White, Red, Green, Purple
Cathodic Protection Cable (CPC) is used in Cathodic protection systems designed to protect steel, water or fuel pipelines and storage tanks, steel pier piles, ships,...
Cathodic Protection Cable (CPC) is used in Cathodic protection systems designed to protect steel, water or fuel pipelines and storage tanks, steel pier piles, ships, offshore platforms and onshore well casings from corrosion. CPC helps make sure your metal lasts as long as possible when exposed to the earth’s electrical charge.
CPC typically consists of a stranded copper conductor insulated from the surrounding soil by one of the following:
Liberty Vent Markers can be used to recondition unsightly steel risers or vent casings at road crossings. Never scrape or paint another vent casing riser....
Liberty Vent Markers can be used to recondition unsightly steel risers or vent casings at road crossings. Never scrape or paint another vent casing riser. Simply slide the Liberty Vent Marker over your existing vent, fasten with a pin or bolt, and you create a durable, visually appealing combination line marker and vent casing free of maintenance.
The marker is UV standard molded from specially formulated
plastics
• Designed to fit over an existing steel vent pipe
• 360° cylinder shape insures the marker can be seen from all angles
• Our graphic system is guaranteed not to fade, peel or chip
• Never requires maintenance
• Easy to install
This product will rebound when hit, meets DOT standards as a line marker, and give years of maintenance free service
Standard Colors:
Yellow, Orange, Red, White, Green, Blue
The Magnum Mini Torch, Model MD-50E, is designed for use with heat-shrinkable coatings and modified bitumen. It has been in use all over the world...
The Magnum Mini Torch, Model MD-50E, is designed for use with heat-shrinkable coatings and modified bitumen. It has been in use all over the world for more than 25 years. It was the first torch to feature a wind resistant electronic starter. It is completely U.L. listed.
nVent ERICO CADWELD Cathodic Protection exothermically welded connections are the accepted method of attaching cathodic protection anode leads to pipes (steel or cast iron), tanks,...
nVent ERICO CADWELD Cathodic Protection exothermically welded connections are the accepted method of attaching cathodic protection anode leads to pipes (steel or cast iron), tanks, and other structures. Cathodic protection systems are designed to prevent galvanic corrosion along a pipeline or in various structures. nVent ERICO CADWELD Cathodic Connections use a special welding material alloy to minimize heat effect on the steel, which is especially important on thin wall and high stress pipes.
FEATURES
Part of the CADWELD® PLUS system, the electronic control unit is a small, hand-held, battery-powered ignition tool that helps simplify the welded connection process. The...
Part of the CADWELD® PLUS system, the electronic control unit is a small, hand-held, battery-powered ignition tool that helps simplify the welded connection process. The CADWELD PLUS system eliminates the need for starting material and flint igniters by utilizing an electronic ignition. Two field-replaceable leads in lengths of 6 ft (1.8 m) or 15 ft (4.6 m) offer increased flexibility and versatility in hard-to-reach areas. This CE/UL® Recognized battery-powered ignition system is designed for 600 connections with one set of eight standard AA batteries (included) and requires no special batteries or chargers.
The CADWELD PLUS control unit initiates the reaction of the CADWELD PLUS welding material cup. The standard unit includes a 6 ft (1.8 m) high temperature control unit lead. The lead attaches to the ignition strip on the welding material cup using a custom, purpose-designed termination clip. After the termination clip is installed on the ignition strip, the installer pushes and holds the ignition button to start a charging and discharging sequence. Within a few seconds, the control unit sends a predetermined voltage to the ignition strip and the reaction is initiated. As the “ready” light is flashing during the first few seconds, the installer can release the button to prevent the ignition.
PRITEC® is a two-layer anti-corrosion coating designed to protect pipe used in the gas, water and waste water industries. PRITEC’S® side extrusion application method is ideal...
PRITEC® is a two-layer anti-corrosion coating designed to protect pipe used in the gas, water and waste water industries. PRITEC’S® side extrusion application method is ideal for coating small and large diameter pipe ranging from 3/4” to 36” in diameter. This coating combines the proven protective qualities of a polyethylene outer coating with a special butyl rubber adhesive.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case that offers total protection for...
|
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4″ (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock. Interior Dimensions: |
|
This perforating tool can be used with compression film which, when used properly, allows the CO2 gas generated by the curing process and excess water...
This perforating tool can be used with compression film which, when used properly, allows the CO2 gas generated by the curing process and excess water to escape.
Scar-Guard® requires compression film and a perforating tool.
2880 Bergey Road, Suite F, Hatfield, PA 19440
Phone: (877) 373-0118 | Fax: (888) 850-3787
Western PA Location: 500 Alpha Drive, Canonsburg, PA 15317