Protal 7200 is a VOC free, 100% solids, 2 part epoxy coating specially formulated to compliment FBE coated pipe. It is a high build liquid coating that is...
Protal 7200 is a VOC free, 100% solids, 2 part epoxy coating specially formulated to compliment FBE coated pipe. It is a high build liquid coating that is brush or spray applied in one coat in the field or shop. It cures very fast to allow quick handling and backfill times.
Denso Protal 7125 is specifically formulated to be applied to colder substrates at colder ambient temperatures. It is a high build liquid coating that is...
Denso Protal 7125 is specifically formulated to be applied to colder substrates at colder ambient temperatures. It is a high build liquid coating that is hand applied in one coat to many areas of in-service pipelines or during pipeline construction in the field or shop. It cures fast to allow quick handling and backfilling, even down to -4°F (-20°C). Protal 7125 is intended for use where a quick cure is required at lower substrate and/or ambient conditions such as during winter applications or on colder operating temperature pipelines. It will also cure after being submersed in water. Used as a rehabilitation coating for existing low temperature in-service operating pipelines, station piping, girth welds, tie-ins, push rack (laybarge applications), abrasion resistant coating for boring applications, repairs to FBE, fittings and fabrication. It may also be used for new construction where colder temperatures exist and preheating or post heating is not practical or feasible.
Powercrete® R95 is a single coat, 100% solids, high build epoxy novolac that coats, repairs and rehabilitates pipelines operating at maximum temperatures up to 95ºC...
Powercrete® R95 is a single coat, 100% solids, high build epoxy novolac that coats, repairs and rehabilitates pipelines operating at maximum temperatures up to 95ºC (203ºF). As an abrasion resistant overlay (ARO) it is compatible with FBE and CTE mainline coatings and can be used on any metal structure. This 2-component, solvent-free epoxy can easily achieve a dry film thickness of up to 40 mils in a single application and can be hand or spray applied.
Call (877) 373-0118 to purchase less than full case counts. Protal 7200 Repair Cartridges are specially formulated for patching and repairing damaged FBE and other...
Call (877) 373-0118 to purchase less than full case counts.
Protal 7200 Repair Cartridges are specially formulated for patching and repairing damaged FBE and other liquid coated pipelines. The repair cartridges are packaged in 2-component tubes that are applied with a dispensing gun (sold separately). Three convenient sizes (400 ml, 50 ml, and 1000ml) are available.
Call (877) 373-0118 to purchase less than full case counts. Denso Protal 7125 Repair Cartridges are specially formulated for patching and repairing damaged FBE and...
Call (877) 373-0118 to purchase less than full case counts.
Denso Protal 7125 Repair Cartridges are specially formulated for patching and repairing damaged FBE and other liquid coated pipelines. The repair cartridges are packaged in 2-component tubes available in 825 ml and 50 ml and are applied with a dispensing gun (sold separately). Can also be used as a coating for Cadweld areas.
TC 7000 High temperature epoxy (color red) is a two-part liquid epoxy system for operation temperatures of up to 300°F. Applied at 6 to 10 mils,...
TC 7000 High temperature epoxy (color red) is a two-part liquid epoxy system for operation temperatures of up to 300°F. Applied at 6 to 10 mils, TC 7000 can be used as a primer for any of the Tapecoat coating products.
When operating temperatures are expected to exceed 180°F, it should be used as a primer for Tapecoat HTMB and 6025 High Temperature Tape Systems.
At a minimum coating thickness of 25 mils, TC 7000 can be considered a stand alone coating.
HBE-95 is a state-of-the-art, 100% solids, two component epoxy coating system which has been specifically formulated as a pipeline coating. Applied to bare steel, HBE...
HBE-95 is a state-of-the-art, 100% solids, two component epoxy coating system which has been specifically formulated as a pipeline coating. Applied to bare steel, HBE products are used for protection of pipeline field joint girth welds, valves and fittings, as a holiday repair material on FBE coated pipe or for pipeline coating rehabilitation.
Protal 7300 is a VOC free, 100% solids epoxy coating specially formulated to coat dry, damp or wet surfaces. It is a high build liquid...
Protal 7300 is a VOC free, 100% solids epoxy coating specially formulated to coat dry, damp or wet surfaces. It is a high build liquid coating that is applied by Denso Protal Applicator Pad, Denso Protal 9″ Roller, or brush in one coat in the field or shop. For the exterior coating of pipelines, structures or other steel surfaces that may be wet or damp due to the environment or as a result of atmospheric condensation.
Protal 7900HT is a VOC free,100% solids, 2 part epoxy coating for pipelines operating at higher temperatures. It is a high build liquid coating that...
Protal 7900HT is a VOC free,100% solids, 2 part epoxy coating for pipelines operating at higher temperatures. It is a high build liquid coating that is spray applied in one coat in the field or shop. It cures fast to allow quick backfill when applied to hot pipe.
2880 Bergey Road, Suite F, Hatfield, PA 19440
Phone: (877) 373-0118 | Fax: (888) 850-3787
Western PA Location: 500 Alpha Drive, Canonsburg, PA 15317