Denso Void Filler is a petrolatum compound specially formulated for hot injection into voids. The compound is based entirely on petroleum hydrocarbons with additives to...
Denso Void Filler is a petrolatum compound specially formulated for hot injection into voids. The compound is based entirely on petroleum hydrocarbons with additives to displace water, inhibit corrosion, enhance adhesion and control flow.
Denso WB Tape is composed of a non-woven synthetic fabric carrier, fully impregnated with a petrolatum compound containing synthetic rubber polymers and inert mineral fillers....
Denso WB Tape is composed of a non-woven synthetic fabric carrier, fully impregnated with a petrolatum compound containing synthetic rubber polymers and inert mineral fillers. To provide additional protection, the tape has a high-density polyethylene backing- specifically developed non-leaching tape for buried pipes, rods, cables, etc. that are exposed to dry soils for long periods.
Densopol 60 & 60 HT is a cold applied, synthetic fabric reinforcement coated with rubber bitumen adhesive and backed with a PVC film. For the...
Densopol 60 & 60 HT is a cold applied, synthetic fabric reinforcement coated with rubber bitumen adhesive and backed with a PVC film. For the anti-corrosion protection of buried or immersed pipes and fittings. The tapes can be applied by hand or machine to weld joints, bends, bare pipe lengths and pipe fittings.
Densotherm Tape is a hot applied bituminous tape. It is comprised of a non-woven synthetic fabric fully impregnated and coated with a flexible, high melting...
Densotherm Tape is a hot applied bituminous tape. It is comprised of a non-woven synthetic fabric fully impregnated and coated with a flexible, high melting point bitumen compound. Densotherm is suitable for use above or below ground for protecting pipes, fittings, welds and bends. The tape is applied with the aid of a propane gas torch.
This advanced Handheld temperature, Humidity and Dew Point Indicator stores and recalls 16 readings with the touch of a button: Jumbo Digital Display F/C switchable...
This advanced Handheld temperature, Humidity and Dew Point Indicator stores and recalls 16 readings with the touch of a button:
SPECIFICATIONS
Ambient Operating Temperature Conditions 0 to 95% RH; 32°F to 120°F (0°C to 50°C)
Dew Point Accuracy /-3F from 30 to 95% RH ( /-2C from 30 to 95% RH)
Dew Point Range -22°F to 120°F (-30°C to 50°C)
Humidity Accuracy /-2% RH from 0 to 60% ( /-3% RH from 60 to 95%)
Response Time 30 seconds to move 63% of full scale
Temperature Accuracy /-1.8F from -22°F to 185°F ( /-1°C from -30°C to 85°C)
Temperature Range -22°F to 185°F (-30°C to 85°C)
Unit Weight 3 lbs
The IRT2DP is a handheld dual laser, non-contact Infrared Thermometer and Dew Point detector with tricolor light (and audible) indication as reading goes close to dew point...
The IRT2DP is a handheld dual laser, non-contact Infrared Thermometer and Dew Point detector with tricolor light (and audible) indication as reading goes close to dew point temperature. It is used to measure and display ambient and surface temperature, relative humidity & dew point temperature.
LSAD Part # L 1112
Available in SEVEN different sizes and styles ranging from 1/2 lb. to 3 lbs., the “Husky” Drive-in anode is the easy, reliable way to protect...
Available in SEVEN different sizes and styles ranging from 1/2 lb. to 3 lbs., the “Husky” Drive-in anode is the easy, reliable way to protect natural gas service lines. One man can install the “Husky” in minutes with only a hammer and screwdriver. With the “Husky”, you just “drive it in” and connect the wire lead to the service line. Reference the Style # in your quote request.
Waterproof and corrosion proof splicing box prefilled with non-toxic sealant. Housing allows splice examination without opening encapsulated splice. Designed to protect cathodic splices from corrosion Waterproof...
Waterproof and corrosion proof splicing box prefilled with non-toxic sealant. Housing allows splice examination without opening encapsulated splice.
Max. Voltage: 100V
Temperature Rating: -40°C – 90°C (194°F)
Measurements: See specificiation sheet for complete product measurements
Wire Range:
Main: #8 – 1/0 (.363″ – .625″ O.D.)
Tap: #12 – #4 (.305″ – .443″ O.D.)
Amperate not to exceed maximum temperature of the conductor
Meter Support System ECSI’s driven post supports are custom designed and manufactured to your specifications. They come in a wide range of styles featuring sturdy...
ECSI’s driven post supports are custom designed and manufactured to your specifications. They come in a wide range of styles featuring sturdy weld construction and are powder coated with epoxy and/or polyester coatings to provide enhanced corrosion protection. Please provide your project requirements in the notes of your Request for Quote.
2880 Bergey Road, Suite F, Hatfield, PA 19440
Phone: (877) 373-0118 | Fax: (888) 850-3787
Western PA Location: 500 Alpha Drive, Canonsburg, PA 15317