ECSI’s pipe wrench handle extenders were developed as a means to safely reduce the amount of force required for tightening. A locking pin is used...
ECSI’s pipe wrench handle extenders were developed as a means to safely reduce the amount of force required for tightening. A locking pin is used to attach the extender to the wrench for personnel safety and the pin is chained to the extender to prevent loss.
Epi-Seal Seam Sealer is a two component, fiberglass reinforced epoxy resin system for high effciency repairs on all riveted, bolted or welded tank or vat...
Epi-Seal Seam Sealer is a two component, fiberglass reinforced epoxy resin system for high effciency repairs on all riveted, bolted or welded tank or vat seams.
Available in 1 LB or 2 LB Kits: 12 Kits per Case
The CCI Model ESC Pull-On end seals are manufactured of 1/8” thick neoprene rubber; assuring excellent chemical resistant and resiliency. Also included are ½” wide...
The CCI Model ESC Pull-On end seals are manufactured of 1/8” thick neoprene rubber; assuring excellent chemical resistant and resiliency. Also included are ½” wide T-304 stainless steel banding with 100% non-magnetic worm gear mechanism.
The CCI Model ESC casing end seal is a one-piece glued seal. It can be pulled-on at the time of construction.
ESOV series ANSI flanged swing-check valves with fusible links are designed to provide a simple yet effective method of closing in an emergency or hazardous...
ESOV series ANSI flanged swing-check valves with fusible links are designed to provide a simple yet effective method of closing in an emergency or hazardous situation. The valves are designed with an external spring load and held in the open position with the fire-sensitive fusible link. The valve will automatically close when the link melts due to fire or high temperatures. The external lever rotates the hinge pin which drives the disc into the closed position, stopping the flow of the liquid, gas or vapor.
FEATURES
• Local and/or remote actuation
• Fire-Safe fusible link
• Economical solution for required safety
• Can be used in horizontal and vertical service
• All valves are factory tested to API 598
• Back pressure ensures a tight seal between the disc and seat
• Once closed, the valve can ONLY be reset manually as a safety feature TYPICAL APPLICATIONS
• Refineries
• Petrochemical
• Off-shore oil rigs
• Chemical process equipment
• Water and Waste applications
• Superheated steam lines on ships
The CCI Model ESW Wrap-Around end seals are manufactured of 1/8” thick neoprene rubber; assuring excellent chemical resistant and resiliency. Also included are ½” wide...
The CCI Model ESW Wrap-Around end seals are manufactured of 1/8” thick neoprene rubber; assuring excellent chemical resistant and resiliency. Also included are ½” wide T-304 stainless steel banding with 100% non-magnetic worm gear mechanism.
The CCI Model ESW casing end seal is a wrap-around seal and is designed to facilitate installation when the carrier line has already been joined together, and the installation is complete.
CCI has your solution to all of your sealing needs when it comes to wall penetration. Our complete sealing system includes Wrap-It Link™ Wall Penetration...
CCI has your solution to all of your sealing needs when it comes to wall penetration. Our complete sealing system includes Wrap-It Link™ Wall Penetration Seals and Wall Sleeves with water stops. Working together, these products will provide you with the necessary seal for your piping system.
Wall damage, often caused by vibration of utility piping or pipe repair, can easily be avoided using CCI’s wall sleeves. Providing a seal that cannot be matched by core drilled holes, our wall sleeves are the answer to your sealing problems. CCI’s wall sleeves have been specifically designed to pair with Wrap-It Link™ Wall Penetration Seals for a leak resistant sealing system
The Girard Polly-Pig is constructed of open cell polyurethane foam of various densities and is available with various types of external coatings. Although each pig...
The Girard Polly-Pig is constructed of open cell polyurethane foam of various densities and is available with various types of external coatings. Although each pig has a specific application, some are interchangeable according to the user’s preference within certain parameters.
The Girard Polly-Pig is molded of polyurethane foam material of light, medium or heavy density. Its bullet shape is designed to aid in traversing fittings and valves. Concave ends are available for bi-directional service. The length of the pig is approximately twice its diameter to reduce the possibility of the pig tumbling in the pipeline. The diameter of the Polly-Pig is larger than the inside diameter of the pipe. This is done to exert a frictional drag between the foam pig and pipe wall. Pigs can be ordered to any custom size requirements.
Polly-Pigs have a concave base plate with a 90A durometer polyurethane coating. This provides a maximum rear sealing surface for the propelling forces of the fluids or gases being used.
Swabs or bare pigs, which have only the bases coated, are normally used in drying or batching operations. Special double-nose or double-dished pigs are used in bi-directional service.
The exterior coatings on the foam bodies consist of criss-cross type spirals of 90A durometer polyurethane. These spirals add strength and give greater wiping and scraping action as compared with bare foam. Girard manufactures two types of criss-cross pigs: the original pattern and the patented “Turning Pattern.” Wire brushes, silicon carbide or plastic bristles can be embedded in these polyurethane spirals to add maximum scraping or brushing action.
The Girard Mandrel Pig consists of a solid steel body with polyurethane or rubber cup and disc wear parts as well as optional accessories for...
The Girard Mandrel Pig consists of a solid steel body with polyurethane or rubber cup and disc wear parts as well as optional accessories for specific applications. This design allows for the easy onsite removal and replacement of the cups, discs and other ware parts with little down time.
The Girard Mandrel Pigs’ cups and disc are available in Polyurethane, Neoprene and Nitrile in various durometers for superior scraping and sealing. They attach to the Girard Mandrel Pig either through a center-hole for smaller sizes (standard 3” thru 14”) or bolt-hole circles for larger sizes (standard 16” and up). The number of cups and discs as well as their arrangement can be customized to accommodate certain application and desired results. This gives the Girard Mandrel Pig the ability to overcome some of the most difficult pipeline obstacles such as short pipeline bends, tees and multi-diameter pipelines.
The ability to add Brushes, Magnets, Gauging Plates and other options to the nearly limitless configurations of the Girard Mandrel Pig make it an excellent choice for pipeline cleaning, batching, gauging, displacement, bi-directional, dual-diameter, hydrostatic testing and removal of paraffin and scale build-up.
2880 Bergey Road, Suite F, Hatfield, PA 19440
Phone: (877) 373-0118 | Fax: (888) 850-3787
Western PA Location: 500 Alpha Drive, Canonsburg, PA 15317