Categories

Shop

Featured

Teco FireBag®

TECO AMERICAS – The FireBag® automatically shuts off gas supply in the event of fire, preventing explosions and the spreading of fire.  When the ambient...

Read more

TECO AMERICAS – The FireBag® automatically shuts off gas supply in the event of fire, preventing explosions and the spreading of fire.  When the ambient temperature reaches 203°F to 212°F (95°C to 100°C) the metal alloy that keeps plug and cartridge together melts and the spring pressure pushes the plug against the gas opening to close it completely.  The FireBag® closes within 60 seconds, per DIN 3586.  No fire or heat detectors are required to automatically stop gas flow.

 

Read less

Add to Quote

Testex Spring Micrometer #354

The Testex Spring Micrometer #354 is a precision spring-loaded dial thickness gauge specifically designed for measuring thickness of Testex replica tape with a range of...

Read more

The Testex Spring Micrometer #354 is a precision spring-loaded dial thickness gauge specifically designed for measuring thickness of Testex replica tape with a range of 0-50 mils and includes a burnishing tool.

Read less

Testex Training Surface

The Testex Training Surface is a 1.5 inch (38mm) diameter disk of phenolic material and is used for familiarizing new users with replica tape....

Read more

The Testex Training Surface is a 1.5 inch (38mm) diameter disk of phenolic material and is used for familiarizing new users with replica tape.

Read less

Add to Quote

Testex X-Coarse Press-O-Film Replica Tape

The Testex X-Coarse Tape is used with a gauge to measure the surface roughness of blast-cleaned steel in the roughness range of 1.5 to 4.5...

Read more

The Testex X-Coarse Tape is used with a gauge to measure the surface roughness of blast-cleaned steel in the roughness range of 1.5 to 4.5 mils.

Read less

Tinker & Rasor APS Holiday Detector Kit

The Tinker & Rasor APS Holiday Detector Kit has a range of 800-35000 Volts and comes with (1) Size 2″ – 36″ Electrode.  Size and...

Read more

The Tinker & Rasor APS Holiday Detector Kit has a range of 800-35000 Volts and comes with (1) Size 2″ – 36″ Electrode.  Size and type as requested: Full Circle Spring 2″ – 36″, Half Circle Spring 0.75″ or 8″, Silicone Rubber Brush 2″ or 8″

Kit Includes: Instrument, (2) Batteries, Ground Cable, Wand Handle, Inspection Paddle, adapter for use with SPY® brand spring electrodes, Carrying Case, Instruction Manual, Letter of Calibration and a 3 year manufacturer’s warranty.

Read less

Add to Quote

Tracer Wire

CU HDPE Tracer Wire is used to conductively locate buried utility lines for the gas, water, sewer, telecommunication and electrical markets.  It is suitable for...

Read more

CU HDPE Tracer Wire is used to conductively locate buried utility lines for the gas, water, sewer, telecommunication and electrical markets.  It is suitable for use for direct burial applications; temperatures not to exceed 75°C/167°F.

Read less

Add to Quote

Type H Non-Conductive Pipe Roller

Non Conductive Pipe Rollers prevent the passing of current from the pipeline to bridge structure and rebars. As a direct replacement for a cast iron...

Read more

Non Conductive Pipe Rollers prevent the passing of current from the pipeline to bridge structure and rebars. As a direct replacement for a cast iron roll, non-conductive pipe rollers are made of the highest specification polyurethane compound which is cast around an integral steel sleeve to form a full length bearing for the axle.

Read less

Add to Quote

Wall Sleeves

CCI has your solution to all of your sealing needs when it comes to wall penetration. Our complete sealing system includes Wrap-It Link™ Wall Penetration...

Read more

CCI has your solution to all of your sealing needs when it comes to wall penetration. Our complete sealing system includes Wrap-It Link™ Wall Penetration Seals and Wall Sleeves with water stops. Working together, these products will provide you with the necessary seal for your piping system.

Wall damage, often caused by vibration of utility piping or pipe repair, can easily be avoided using CCI’s wall sleeves. Providing a seal that cannot be matched by core drilled holes, our wall sleeves are the answer to your sealing problems. CCI’s wall sleeves have been specifically designed to pair with Wrap-It Link™ Wall Penetration Seals for a leak resistant sealing system

Read less

Add to Quote

Western Technology 8910 UVC Germ Killer Light

The WT GERM KILLER®  uses Ultraviolet Germicidal Irradiation (UVGI). UVGI is a disinfection method that uses short wavelength ultraviolet (UV-C) light to kill or inactivate microorganisms...

Read more

The WT GERM KILLER®  uses Ultraviolet Germicidal Irradiation (UVGI). UVGI is a disinfection method that uses short wavelength ultraviolet (UV-C) light to kill or inactivate microorganisms by destroying their DNA, leaving them unable to perform vital cellular functions.

The technology we use is 99.9% effective in killing or inactivating mold and mold spores, bacteria including MRSA, TB, E. coli, Listeria, Salmonella, C. diff spores, CRKP, VRE and all viruses including colds, flu, measles, HIV Retrovirus, Infectious Hepatitis, Norovirus and the Coronavirus.

Training and certification are required to operate the light.

Read less

Add to Quote

Western Technology BodyLight 8910

The BODYLight™ is the 1st Explosion Proof Rechargeable Battery-Powered LED Light in the World to be ETL certified by an OSHA approved Nationally Recognized Testing Laboratory...

Read more

The BODYLight is the 1st Explosion Proof Rechargeable Battery-Powered LED Light in the World to be ETL certified by an OSHA approved Nationally Recognized Testing Laboratory (NRTL) Intertek. It boasts ~3.5hrs runtime with 2,500± lumens on High (task specific mode). This LED work light is more than just a flashlight, it is built for industrial services. The BODYLight is machined from solid blocks of 6061-T6 Aluminum for durability. They are also polyurethane wrapped with protective bumpers and glow-in-the-dark paneling for added safety.

As a member of the Explosion Proof KICK-IT TOUGH™ LED Safety Lights, it holds the same multiple certifications:

  • Class I, Div 1 & 2, Groups C & D;
  • Class II, Div 1 & 2, Groups E, F & G
  • CSA Zones 1 & 2; Zones 20, 21 & 22
  • Portable Luminaire (UL 153)
  • Wet Location (NEMA TYPE 6-P)
  • Low Voltage (LVLE)

Read less

Add to Quote

Search

Shopping cart

Cart

Have Questions?

Call 877-373-0118 to speak with a product specialist.

or

Click here to send a message.