TC COLOR COAT PRIMER is an opaque color wax primer formulated for use as a surface conditioner and companion undercoat for the TC COLOR COAT...
TC COLOR COAT PRIMER is an opaque color wax primer formulated for use as a surface conditioner and companion undercoat for the TC COLOR COAT wax coating system.
TC COLOR COAT PRIMER is specifically designed not to discolor TC COLOR COAT TAPE in above grade or below grade applications
Color Coat is a versatile 60 mil environmentally friendly wax coating system designed to protect piping and metal structures from damage and deterioration caused by corrosion. The specially formulated...
Color Coat is a versatile 60 mil environmentally friendly wax coating system designed to protect piping and metal structures from damage and deterioration caused by corrosion. The specially formulated odorless, selfhardening, wax coating system is suited for both above and below grade application.
Color Coat is a highly conformable coating that can be applied over most stable surfaces whether they are dry, damp or wet. A coating ideal for protecting structures such as bridge crossings, riser pipe, flanges, valves and all types of piping and metal structures. Especially suited for vaults and close quarter applications because it is virtually odorless, fume free and non toxic.
Resistant to Ultra Violet Light and environmental exposure, Color Coat is durable and aesthetically pleasing, available in a wide variety of colors including a full range of Safety Code colors (Blue, Green, Grey, White, Yellow, Red & Black).
Color Coat Primer for use with Color Coat Tape
TC Enviroprime is a formulated wax blend primer designed as a surface conditioner and companion undercoat for the TC Envirocoat and TC Enviroshield Marine coating...
TC Enviroprime is a formulated wax blend primer designed as a surface conditioner and companion undercoat for the TC Envirocoat and TC Enviroshield Marine coating systems. TC Enviroprime is brown in color. It can be used with all brown color wax coatings. Used on dry, wet or submerged surfaces as a pre-coat and initial contact coating for pipe or metal structures, TC Enviroprime prepares the substrate with a preferential wetting film displacing any surface moisture and providing TC Envirotape with an environment that will allow it to function to its full design capabilities.
TC Envirostretchwrap is a 1-mil plastic outer wrap applied over TC Envirotape prior to backfill. Envirostretchwrap provides extra mechanical strength and coating stability in a...
TC Envirostretchwrap is a 1-mil plastic outer wrap applied over TC Envirotape prior to backfill. Envirostretchwrap provides extra mechanical strength and coating stability in a below grade environment.
TC Envirotape is a 70 mil petrolatum blend, wax saturated fiber-tape for ambient to 250°F temperature application. Appropriate for coating dry or wet surfaces; particularly...
TC Envirotape is a 70 mil petrolatum blend, wax saturated fiber-tape for ambient to 250°F temperature application. Appropriate for coating dry or wet surfaces; particularly suited for coating fittings, flanges, valves, mechanical couplings and other irregular configurations. Recommended use with TC Enviroprime, overcoat with TC Envirostretchwrap bellow grade, TC Enviroseal Mastic above grade or TC Wet Bound Epoxy Mastic for both above and below grade applications.
TC Flangecoat is a thixotropic corrosion preventative caulking material designed to protect the flange interface and bolts from atmospheric corrosion. As a field-proven, environmentally-safe coating...
TC Flangecoat is a thixotropic corrosion preventative caulking material designed to protect the flange interface and bolts from atmospheric corrosion. As a field-proven, environmentally-safe coating TC Flangecoat is ideal for use on new and in-service flanges. It will not shrink, crack or dry out over time. This innovative 100% solids coating allows for easy re-entry and flange maintenance. Each box of Flangecoat contains Flangecoat Tape.
Tapecoat H35 Tape is a 35 mil tape designed to protect above ground, buried or submerged metal surfaces from corrosion and electrolysis. It is used...
Tapecoat H35 Tape is a 35 mil tape designed to protect above ground, buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Its unique “MAF” (multipolymer alloy film) backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull back due to memory. Appropriate for coating small to moderate size pipe with a single layer; a 50% overlap may be preferred when coating larger diameter pipe. Tapecoat H35 Gray is resistant to UV rays, thermal expansion, impact, abrasion and can be applied over a wide range of ambient temperatures.
Tapecoat H50 is designed to protect above ground, buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints,...
Tapecoat H50 is designed to protect above ground, buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Its unique “MAF” film backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull back due to memory. Tapecoat H50 Gray is resistant to UV rays, thermal expansion, impact, abrasion and can be applied over a wide range of ambient temperatures.
Tapecoat HT/MB (High Temperature, Mesh Backed) Tape is a 40 mil polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance...
Tapecoat HT/MB (High Temperature, Mesh Backed) Tape is a 40 mil polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance on pipelines with service temperatures up to 300°F (149°C). The coating provides protection against corrosion and electrolysis on metal substrates. The mesh backing allows the coating to conform well to the pipe surface but does not stretch or elongate giving the HT/MB its exceptional strength against soil stress.
Tapecoat HT/MB must be applied using a 50% minimum overlap and it requires the use of a primer prior to application.
Tapecoat M50 is a 50 Mil Gray polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance to protect against corrosion...
Tapecoat M50 is a 50 Mil Gray polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance to protect against corrosion and electrolysis on metal substrates. The Tapecoat M50 has an integrated primer in the adhesive which allows for faster application as there is no need to apply a separate primer when application temperatures are above 40°F. Appropriate for coating small to large diameter pipe, bends and metal structures, Tapecoat M50 is especially well suited for reconditioning field coated pipe and coating pipe in areas with high soil stresses.
2880 Bergey Road, Suite F, Hatfield, PA 19440
Phone: (877) 373-0118 | Fax: (888) 850-3787
Western PA Location: 500 Alpha Drive, Canonsburg, PA 15317