Products

Tapecoat M50 RC (50 MILS)

Tapecoat M50 is a 50 Mil Gray polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance to protect against corrosion...

Tapecoat M50 is a 50 Mil Gray polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance to protect against corrosion and electrolysis on metal substrates. The Tapecoat M50 has an integrated primer in the adhesive which allows for faster application as there is no need to apply a separate primer when application temperatures are above 40°F. Appropriate for coating small to large diameter pipe, bends and metal structures, Tapecoat M50 is especially well suited for reconditioning field coated pipe and coating pipe in areas with high soil stresses.

Read less

Variation

Add to Quote

Tapecoat HT/MB

Tapecoat HT/MB (High Temperature, Mesh Backed) Tape is a 40 mil polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance...

Tapecoat HT/MB (High Temperature, Mesh Backed) Tape is a 40 mil polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance on pipelines with service temperatures up to 300°F (149°C). The coating provides protection against corrosion and electrolysis on metal substrates. The mesh backing allows the coating to conform well to the pipe surface but does not stretch or elongate giving the HT/MB its exceptional strength against soil stress.
Tapecoat HT/MB must be applied using a 50% minimum overlap and it requires the use of a primer prior to application.

Read less

Variation

Canusa Wrapid Tape

CANUSA Wrapid Tape™ consists of a crosslinked polyolefin backing, coated with a protective, heat sensitive anticorrosion adhesive which effectively bonds to steel substrates and common...

CANUSA Wrapid Tape™ consists of a crosslinked polyolefin backing, coated with a protective, heat sensitive anticorrosion adhesive which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy. Upon the application of heat, Wrapid Tape™ shrinks down to fully encapsulate the protected substrate. The product is packaged in convenient rolls with various widths to protect and repair pipelines, fittings, bends, elbows and other irregular configurations.
CANUSA Wrapid Tape™ is available in either Black or Yellow 2″, 3″ 4″, or 6″ x 50′ lengths.

Read less

Variation

Add to Quote

Handy Cap – 20 per Case

The Tapecoat / Royston Handy Cap™ is a 4″ x 4″ prefabricated assembly designed for cathodic protection of leads to pipes and tanks. When pressed...

The Tapecoat / Royston Handy Cap™ is a 4″ x 4″ prefabricated assembly designed for cathodic protection of leads to pipes and tanks. When pressed by hand into position over the anode lead wire weld, it forms a thick, highly resistant electrical insulation seal over the weld, the end of the lead wire and the surrounding area of the pipe or tank. Designed to be used with Royston Roybond 747 Primer.

Read less

Variation

Add to Quote

Tracer Wire

CU PE Tracer Wire is used to conductively locate buried utility lines for the gas, water, sewer, telecommunication and electrical markets. It is suitable for...

CU PE Tracer Wire is used to conductively locate buried utility lines for the gas, water, sewer, telecommunication and electrical markets. It is suitable for use for direct burial applications; temperatures not to exceed 75°C/167°F.

Read less

Variation

Add to Quote

OVERPIPE® Protection Plates

The OVERPIPE® protection plates are made of injected HDPE. They have dedicated features such as: Provides an impenetrable barrier for shallow buried pipeline to protect...

The OVERPIPE® protection plates are made of injected HDPE. They have dedicated features such as:

Provides an impenetrable barrier for shallow buried pipeline to protect critical infrastructure from the impact of an excavator bucket.
Holes all over the surface (but less than 1% of the total surface) to allow the flow of water to go through and not disrupt the measurement of the cathodic protection. The holes come from molding and not by later drilling which would weaken the plate.
Beveled edges and non-slip pins on both sides to facilitate handling and avoid slip and fall accidents.
Full body yellow color (UV resistant) as an effective warning signal (different colors possible depending on the nature of the networks).
Fully customizable embossed warning message.

The OVERPIPE® protection plates come in various dimensions to fit with the pipe diameter and to grant an extra width on the sides. The plates are assembled by superposition (10 cm / 4 inch overlap) or by juxtaposition and are linked by HDPE clips and caps.

MOQ: 5 Plates (must order a minimum of 5 plates)

Read less

Variation

OVERPIPE Plates

Add to Quote

Liberty HD Rockshield®

Liberty HD Rockshield® provides durable protection to all of your underground infrastructures. Made from random looped, lead free, PVC material, this high density product will...

Liberty HD Rockshield® provides durable protection to all of your underground infrastructures. Made from random looped, lead free, PVC material, this high density product will save you money by eliminating the need for select back fill and provides long term abrasion resistance for the life of the pipe.

Available Standard Sizes for Liberty HD Rockshield®

36″ x 30′ Rolls for 10” Diameter Pipe

44″ x 25′ Rolls for 12” Diameter Pipe

54″ x 20′ Rolls for 16” Diameter Pipe

67″ x 15′ Rolls for 20” Diameter Pipe

PADS

74” x 80” for 24” Diameter Pipe

74” x 98” for 30” Diameter Pipe

74” x 117” for 36” Diameter Pipe

74” x 136” for 42” Diameter Pipe

Read less

Variation

Add to Quote

CCI Omniroller Casing Spacers

The NEW CCI OmniRoller Casing Spacers are supplied with a patented runner equipped with an innovative multidirectional assembly designed for the following: • Maintain cathodic...

The NEW CCI OmniRoller Casing Spacers are supplied with a patented runner equipped with an innovative multidirectional assembly designed for the following:

• Maintain cathodic protection between the carrier pipe and casing pipe to prevent premature corrosion
• Reduce the coefficient of friction within the casing pipe for ease of installation
• Allow for longer installations while maintaining the desired grade
• Prevent the carrier pipe from spiraling within the casing pipe during installation, unlike unidirectional rollers

The CCI OmniRoller Casing Spacers are manufactured with an 8” wide Coated Carbon Steel or Stainless Steel shell for nominal carrier pipe sizes ranging from 4” to 24”. Each OmniRoller runner can be supplied with up to 3 multidirectional assemblies depending on the carrier pipe type and application.

Read less

Variation

Add to Quote

Chicago Fittings Rigid Risers

Chicago Fittings Rigid Risers: Rigid Risers come pre-assembled with ASTM certified, polyethylene (PE) tubing. Designed for unmatched durability, the Rigid Riser has a solid carbon...

Chicago Fittings Rigid Risers:

Rigid Risers come pre-assembled with ASTM certified, polyethylene (PE) tubing. Designed for unmatched durability, the Rigid Riser has a solid carbon steel casing to protect the gas line from any above-ground damage, and an electrostatically applied coating for corrosion resistance.

On the connection end, the heavy wall thread and convenient wrenching hex creates an ease of installation. Simply engage the CNC quality ANPT threads to the connection point, tighten it securely, and the work is done.

These risers are compatible for heat fusion joining with pipe or fittings manufactured from like or similar resin by butt fusion, socket fusion, or electrofusion methods. Mechanical fittings can be used to install Anodeless Rigid Risers depending on local requirements. Mechanical fitting options include stab and compression fittings.

Read less

Variation

Add to Quote

Chicago Fittings X-Riser

Chicago Fittings X-Riser: • ELIMINATE Below Grade Joints at the Building • Bottoming Nut (Positive Stop) eliminates the need for Torque Measurement • One Piece...

Chicago Fittings X-Riser:

• ELIMINATE Below Grade Joints at the Building

• Bottoming Nut (Positive Stop) eliminates the need for Torque Measurement

• One Piece Bi-Directional Seal/Ferrule Assembly Design eliminates worries of “Order & Orientation” of multiple internal components

• Swage Collar Design eliminates the need for a “Weep Hole” which exposes the PE to both UV Rays and outdoor elements

• Eliminates the need for Chamfering Tools and Fusion Equipment

Read less

Variation

Add to Quote

Categories

Featured

Tapecoat M50 RC (50 MILS)

Tapecoat HT/MB

Canusa Wrapid Tape

Handy Cap – 20 per Case

Tracer Wire

OVERPIPE® Protection Plates

MOQ: 5 Plates (must order a minimum of 5 plates)

Liberty HD Rockshield®

CCI Omniroller Casing Spacers

Chicago Fittings Rigid Risers

Chicago Fittings X-Riser

Search

Shopping cart

Cart

Have Questions?

Natural Gas & Water Industry Products

Liberty Sales & Distribution, LLC